Hello.
I am Director Hwang, from Cleor Clinic Gangnam Branch.
Have you ever had a lifting procedure, only to find that while the surface was smoothed, the deep sagging remained, or conversely, the inner layers were tightened but the surface elasticity felt weak?
"I had a lifting procedure, but it seems like only one area improved. I'm not sure what to do to see changes across my entire face."
Facial aging is not a change that occurs in just one layer.
The deepest SMAS fascia layer causes sagging, while the dermis layer near the surface affects elasticity and fine lines. Because changes in both layers occur simultaneously, there is a limitation in achieving changes across the entire face with only one method.
Just as two instruments create harmony in different ranges, the Gangnam Ulthermage is a direction that combines two procedures with different depths and energy types.
Today, I will summarize what Gangnam Ulthermage is and the differences between the 2nd generation Ultherapy Prime and the 4th generation Thermage FLX.
What is Gangnam Ulthermage?
👉 Gangnam Ulthermage is a combined lifting procedure performed in a single session, utilizing the 2nd generation Ultherapy Prime, which acts while monitoring the SMAS fascia layer in real-time with an 8mm imaging guide, and the 4th generation Thermage FLX, which delivers monopolar radiofrequency to the surface dermis layer.
Ultherapy Prime and Thermage FLX are medical lifting devices that are also operated individually.
Ultherapy Prime focuses on condensing the SMAS fascia layer with high-intensity focused ultrasound (HIFU) energy, while Thermage FLX focuses on tightening the dermis layer near the surface with monopolar radiofrequency.
Because the two procedures have different target layers and energy types, they are structured to operate in a mutually complementary synergy without interfering with each other, even when performed on the same area.
Technical Features of Gangnam Ulthermage
👉 Gangnam Ulthermage is a procedure with three key features: the precision of the 2nd generation Ultherapy Prime's imaging guide, the dermal RF action of the 4th generation Thermage FLX, and a combined structure where the target layers do not overlap.
Precision of the 2nd generation Ultherapy Prime's imaging guide
Ultherapy Prime is the 2nd generation upgrade version of the existing Ultherapy.
While the existing Ultherapy could visualize skin layers up to a depth of 4.5mm, Ultherapy Prime extends the imaging guide to a depth of 8mm, allowing the practitioner to confirm the location of the SMAS fascia layer more accurately in real-time and deliver energy.
The application of a 19-inch high-resolution screen and noise reduction technology is known as the biggest improvement, making skin layer analysis clearer.
It is also reported that the addition of a micro-energy control function reduces the burden of pain during the procedure compared to before.
Monopolar RF action of the 4th generation Thermage FLX
Thermage FLX is a 4th generation monopolar radiofrequency (RF) device.
It works by delivering uniform thermal energy to the entire dermis layer near the surface, stimulating the production of collagen and elastin.
As it is a procedure that focuses on surface elasticity loss, fine lines, and skin texture improvement, its target area is different from the deep layers handled by Ultherapy Prime.
Combined structure where target layers and energy do not overlap
Because Ultherapy Prime handles the SMAS fascia layer (4.5mm depth) and Thermage FLX handles the surface dermis layer, the target areas do not overlap even when performed on the same site.
The types of energy also differ—ultrasound and radiofrequency—so it is known as a direction that brings about two types of changes in a single session without interfering with each other.
Effects and Advantages of Gangnam Ulthermage
👉 The core advantages of Gangnam Ulthermage are summarized in three points: the synergy of two different energies, the precision guide of the 2nd generation Ultherapy Prime, and multi-layer access in a single session.
First, two different energies create synergy.As the ultrasound of Ultherapy Prime acts on the deep SMAS fascia layer and the radiofrequency of Thermage FLX acts on the surface dermis layer, it is a direction that approaches two areas that are difficult to treat with a single procedure.
Next, the precision guide of the 2nd generation Ultherapy Prime is applied.
Because it is performed with a 2nd generation device that has an imaging depth extended to 8mm compared to existing Ultherapy and includes micro-energy control, it is a structure that allows the practitioner to act while confirming the SMAS location more accurately.
Finally, multi-layer access is possible in a single session.
It has the advantage of reducing the burden of scheduling compared to receiving the two procedures separately, and the recovery period is handled at once.
Gangnam Ulthermage Lineup
👉 At the Gangnam branch, we operate shot count options for both Ultherapy Prime and Thermage FLX, and it is structured so that you can proceed with the Ulthermage flow by combining the two procedures.
2nd Generation Ultherapy Prime
You can choose the number of shots according to the area range and degree of sagging, and 600 shots for the entire face is the generally recommended option.
4th Generation Thermage FLX
Thermage FLX 600 shots are operated as the standard option for the entire face, and a separate dedicated Eye Thermage FLX tip is applied for the thin and sensitive eye area.
The number of shots and the combination ratio suitable for your facial lines, degree of sagging, and pain tolerance are examined together during the pre-procedure consultation.
Who is Gangnam Ulthermage for?
Those who felt that the changes from a single lifting procedure were weak
Those who want to see SMAS fascia layer lifting and surface elasticity care at the same time
Those who want a precise procedure with an 8mm imaging guide
Those who want to increase the intensity of non-surgical anti-aging without the burden of incision surgery
Those who want to finish the procedure schedule at once
Side Effects and Things to Know Before Gangnam Ulthermage
👉 Gangnam Ulthermage is a procedure where two strong energy treatments are performed at once, so the burden of pain, cost, and recovery may be greater than with a single procedure.
Pain burden
Although Ultherapy Prime is reported to have reduced pain compared to existing Ultherapy due to 2nd generation micro-energy control, it is a procedure with stimulation reaching the deep SMAS layer, so pain may accompany it.
Thermage FLX is reported to have relatively mild, warm stimulation, but when receiving both procedures together, the cumulative stimulation tends to be greater than with a single procedure.
Cost burden
Since Ultherapy Prime and Thermage FLX are procedures that consume genuine medical device tips per session, it is good to know in advance that if you proceed with both, the cost will be at the level of the sum of the individual procedures.
Recovery aspect
Light swelling, redness, and stinging may accompany the entire face for a few days immediately after the procedure.
Most are reported to subside naturally, but if you have an important schedule approaching, it is recommended to adjust the timing of the procedure.
Timing of effect manifestation
Thermage FLX starts to show changes from about 1 to 2 months after the procedure, and Ultherapy Prime follows a flow where changes settle in at the 2 to 3-month mark, so it is good to understand in advance that it is a procedure that settles in gradually rather than immediately.
Please inform us in advance as the procedure may be restricted in the following cases:
If you are pregnant or breastfeeding
If there is active inflammation or herpes in the treatment area
If you use internal electrical devices such as an artificial pacemaker
If you have a history of implants or thread procedures in the treatment area
If you have a keloid constitution or tend to scar easily
⚠️ Precautions Before and After Gangnam Ulthermage
👉 For Gangnam Ulthermage, management by timing both before and after the procedure affects the recovery aspect and the perception of results.
❓ Frequently Asked Questions (FAQ)
Q. How is the 2nd generation Ultherapy Prime of Gangnam Ulthermage different from existing Ultherapy?
The biggest difference is the precision of the imaging guide.
While existing Ultherapy could visualize skin layers up to 4.5mm, the 2nd generation Ultherapy Prime allows for more accurate procedures by confirming the SMAS fascia layer location with 19-inch video monitoring extended to 8mm.
The addition of a micro-energy control function to reduce pain burden is also reported as an improvement.
Q. What is the significance of Gangnam Ulthermage compared to a single procedure?
A single procedure only acts on one treatment area, but Gangnam Ulthermage proceeds with two procedures with different action depths at once, structuring it to approach both the SMAS fascia layer and the surface dermis layer.
It is a combined procedure with a concept similar to two instruments in different ranges creating harmony together.
Q. Is it okay to proceed with both procedures on the same day for Gangnam Ulthermage?
Since the action layers and energy types are different, cases proceeding on the same day are generally recommended.
Ultherapy Prime is for the SMAS fascia layer, and Thermage FLX is for the surface dermis layer, so the treatment areas do not overlap and are structured not to interfere with each other.
However, the fact that pain and recovery burdens are cumulative must be considered in advance.
Q. When do the effects of Gangnam Ulthermage appear?
Thermage FLX starts to show changes from about 1 to 2 months after the procedure, and Ultherapy Prime follows a flow where changes settle in at the 2 to 3-month mark.
Since it is a procedure where collagen regeneration occurs gradually rather than immediately, it is recommended to observe it over time.
Q. How much pain is involved in Gangnam Ulthermage?
Although the 2nd generation Ultherapy Prime has reduced pain compared to existing Ultherapy due to micro-energy control, it is a procedure with stimulation in the deep SMAS layer, so pain may accompany it.
Thermage FLX is reported as relatively mild, warm stimulation.
When receiving both procedures together, it is common to receive help from numbing cream and painkillers before the procedure.
Q. Which areas is the Eye Thermage of Gangnam Ulthermage applied to?
It is a line where a dedicated tip for the thin and sensitive eye area is operated separately.
Since the eye area has the thinnest skin on the face, it is structured to apply energy adjusted with a dedicated tip, so it is performed separately from the full-face tip.
Q. How long do the effects of Gangnam Ulthermage last?
Thermage FLX is generally known to last for 1 to 1.5 years, and Ultherapy Prime is known to last for about 1 to 2 years.
When performed together, many people feel a greater range of change than with a single procedure, but there are individual differences.
Facial aging is a change that occurs simultaneously in the deep SMAS fascia layer and the surface dermis layer.
Because there is a limitation in acting on both layers with only one method, this is also why the flow of combining two procedures with different action depths has become established.
Gangnam Ulthermage is a procedure that combines the 2nd generation Ultherapy Prime, which acts while confirming the SMAS fascia layer in real-time with an 8mm imaging guide, and the 4th generation Thermage FLX, which acts on the surface dermis layer with monopolar RF, in a single session.
However, as you are receiving two strong procedures together, it is also good to know that the burden of pain, cost, and recovery may be greater than with a single procedure.
The Gangnam Ulthermage configuration suitable for your facial lines and degree of sagging will be confirmed directly during the consultation.
If you felt that the changes from one lifting procedure were weak, please feel free to visit Cleor Clinic Gangnam Branch.
Even before deciding on the procedure, we will guide you in detail about your facial condition and the suitable lifting direction through a pre-procedure consultation.
※ This content is for general information purposes only, and results may vary by individual.
Please decide on the exact diagnosis and whether to proceed with the procedure through a consultation with a specialist.
▼ Cleor Lifting ▼
https://gangnam.cleorclinic.com/ko/treatments/리프팅/울쎄라피%20프라임
▼ Columns you might also like ▼
https://gangnam.cleorclinic.com/ko/about/posts/Wscb55GjRWgt3H8zYp3U
울쎄라피 프라임은 2~3개월 시점에 변화가 자리 잡는 흐름이라
즉각적인 변화보다 점진적으로 자리 잡는 시술이라는 점을 미리 이해하시면 좋아요.
다음과 같은 경우에는 시술이 제한될 수 있어 미리 알려주세요.
임신 중이거나 수유 중인 경우
시술 부위에 활동성 염증·헤르페스가 있는 경우
인공 심박동기 등 체내 전기 장치를 사용하는 경우
시술 부위에 보형물·실 시술 이력이 있는 경우
켈로이드 체질이거나 흉터가 잘 남는 편인 경우
⚠️ 강남 울써마지 시술 전후 주의사항
👉 강남 울써마지는 시술 전과 후 모두 시점별 관리가 회복 양상과 결과 체감에 영향을 줍니다.
❓ 자주 묻는 질문 (FAQ)
Q. 강남 울써마지의 2세대 울쎄라피 프라임은 기존 울쎄라와 어떻게 다른가요?
가장 큰 차이는 영상 가이드 정밀도예요.
기존 울쎄라가 4.5mm 깊이까지 피부 층을 영상으로 확인할 수 있었다면,
2세대 울쎄라피 프라임은 8mm까지 확장된 19인치 영상 모니터링으로
SMAS 근막층 위치를 더 정확하게 확인하며 시술할 수 있습니다.
미세 에너지 제어 기능이 추가되어 통증 부담이 줄어든 것도 개선점으로 보고됩니다.
Q. 강남 울써마지는 한 가지 단독 시술과 비교해 어떤 의미가 있나요?
한 가지 시술은 한 작용 영역에만 작용하지만
강남 울써마지는 작용 깊이가 다른 두 시술을 한 번에 진행해
SMAS 근막층과 표면 진피층 두 영역에 함께 접근하는 구조예요.
다른 음역대를 맡는 두 악기가 함께 화음을 만드는 것과 비슷한 개념의 결합 시술입니다.
Q. 강남 울써마지를 같은 날 두 시술 모두 진행해도 괜찮나요?
작용 층과 에너지 종류가 달라 같은 날 진행하는 케이스가 일반적으로 권해지는 편이에요.
울쎄라피 프라임은 SMAS 근막층, 써마지 FLX는 표면 진피층이라
작용 영역이 겹치지 않아 서로 간섭하지 않는 구조입니다.
다만 통증과 회복 부담이 누적되는 점은 미리 고려해야 합니다.
Q. 강남 울써마지 효과는 언제부터 보이나요?
써마지 FLX는 시술 후 약 1~2개월부터 변화가 시작되고
울쎄라피 프라임은 2~3개월 시점에 변화가 자리 잡는 흐름이에요.
즉각적인 변화보다 콜라겐 재생이 점진적으로 일어나는 시술이라
시간을 두고 관찰하는 것이 권해집니다.
Q. 강남 울써마지 통증은 어느 정도인가요?
2세대 울쎄라피 프라임은 미세 에너지 제어로 기존 울쎄라 대비 통증이 줄어든 편이지만
SMAS 깊은 층 자극이 있는 시술이라 통증이 동반될 수 있어요.
써마지 FLX는 비교적 약한 따뜻한 자극으로 보고됩니다.
두 시술을 함께 받을 때는 시술 전 마취 크림과 진통제 도움을 받는 경우가 많아요.
Q. 강남 울써마지의 아이 써마지는 어떤 부위에 적용되나요?
얇고 예민한 눈가 전용 팁이 별도로 운영되는 라인이에요.
눈가는 얼굴에서 가장 얇은 피부라 전용 팁으로 조절된 에너지를 적용하는 구조라
얼굴 전체 팁과는 별도로 진행됩니다.
Q. 강남 울써마지 효과는 얼마나 유지되나요?
써마지 FLX는 일반적으로 1~1.5년,
울쎄라피 프라임은 1~2년 정도 유지되는 것으로 알려져 있어요.
함께 진행한 경우 단독보다 변화 폭이 크게 느껴지는 분이 많지만 개인차가 있습니다.
얼굴 노화는 깊은 SMAS 근막층과 표면 진피층에서 동시에 일어나는 변화입니다.
한 가지 작용 방식만으로는 두 층 모두에 작용하기 어려운 한계가 있어
작용 깊이가 다른 두 시술을 결합해 가져가는 흐름이 자리 잡은 이유이기도 해요.
강남 울써마지는 8mm 영상 가이드로 SMAS 근막층을 실시간 확인하며 작용하는
2세대 울쎄라피 프라임과 표면 진피층에 모노폴라 RF로 작용하는
4세대 써마지 FLX를 한 번의 일정 안에서 결합한 시술이에요.
다만 두 가지 강한 시술을 함께 받는 만큼
통증·비용·회복 부담이 단독 시술보다
커질 수 있다는 점도 함께 알아두시면 좋아요.
본인 얼굴 라인과 처짐 정도에 어울리는 강남 울써마지 구성은
상담 시 직접 확인해 드립니다.
한 가지 리프팅으로 변화가 약하게 느껴졌다면
클레오르의원 강남점으로 부담 없이 방문해 주세요.
시술 결정 전이라도 사전 진료를 통해 본인 얼굴 상태와
어울리는 리프팅 방향을 자세히 안내해 드리겠습니다.
※ 본 내용은 일반적인 정보 제공을 위한 글이며, 개인에 따라 결과는 달라질 수 있습니다.
정확한 진단과 시술 여부는 전문의 상담을 통해 결정하시기 바랍니다.
▼ 클레오르 리프팅 ▼
https://gangnam.cleorclinic.com/ko/treatments/리프팅/울쎄라피%20프라임
▼ 함께 보면 좋은 칼럼 ▼
https://gangnam.cleorclinic.com/ko/about/posts/Wscb55GjRWgt3H8zYp3U